Stationary Scissor Lift

Stationary scissor lift is a special hydraulic lift for transports goods between the building. The products are mainly transported up and down with different working layers of goods; Stereo garage and underground garage story car elevator. The hydraulic system of the stationary scissor lift is equipped with safety device against drop and overload, and the operating buttons can be set on each floor and the working table of the lifting platform to achieve multi-point control. The stationary scissor lift has strong structure, large carrying capacity, stable lifting, easy installation and maintenance, and is economical and practical ideal cargo transportation equipment for changing elevators between low floors. According to the installation environment and the operating requirements of the elevator, different optional configurations can be selected to achieve better operating results.

Stationary Scissor Lift:

stationary scissor lift

Nominal Load Capacity: 500kg-40ton

Maks. Løftehøyde: 6m

Type: Hydraulic

Power supply: three-phase AC

Table size: specified by customer

Stationary Scissor Lift Specification


Max platform height 2m 2,5m 3m 3.5 meters 4m
Lifting capacity 3000kg-10,000kg
Velocity 70mm / s
Max platform size 3000 * 6000mm
Installation space (pit size) (Plattformbredde + 300 mm) * (Dybde + 60 mm)
Closed height 550mm to 800mm
Approach direction 180° through type
Control ways Platform control, main control box
Surface treatment Powder coating
Colour Available in blue, yellow, red, dark color
Pack A 20ft container
Installation type Pit mounted
Working pressure ≤13Mpa
Driving mode Hydraulic Cylinder
Control mode PLC-kontroll
Control voltage 24V DC
voltage three-phase alternating current
Foundation requirements 1. Concrete thickness ≥300 mm
2. Concrete strength ≥C20 (200Mpa

Stagnant scissor lift

Stationary scissor lift

Parameter of scissor lift:

Løftevekt: 3500 (kg)

Rise time: 50 (s)

Løftehøyde: 1750 (mm)

Strømforsyning: 380 (V) 220V 415V

1. Each Lifting Stationary Scissor Lift is equipped with a small scissor, which USES the same hydraulic balance control mode as the main lifts to increase the maximum lifting height by 400mm.

2, stationary scissor lift can be configured with high-precision four-wheel positioning. The hydraulic mode of the primary and secondary oil cylinders ensures the balance of the system, which has the following advantages: No connecting rod, comfortable working, barrier-free, the distance between the running plates can be adjusted as desired.

3. The minimum height of the stationary scissor lift is only 220mm, which can reduce the cost of mounting on the ground.

4th. The lift balance can be detected by photoelectric switch to ensure vehicle safety.

5. Explosion-proof valves are installed on all cylinders of the equipment to prevent sudden descent after cylinder failure and ensure personal safety.

Stationary double scissor lift:

Stationary Double Scissor Lift

Stagnant double scissor lift parameter:

Nominal Load Capacity: 500kg-40ton

Maks. Løftehøyde: 6m

Type: Hydraulic

Power supply: three-phase AC

Table size: specified by customer

Tilted/overturned scissor lift:

Rocker Scissor Lift

Type of overturned fixed lifting platform:

Rated load: 500 kg - 5 tons

Max lifting height: 8m

Tilt/cartwheel Angle: 45 degrees

Power supply: three-phase AC

Stationary scissor lift design feature

1. 40 tons cargo, multi-point control, interactive interconnection between upper and lower floor, safe use;
2, high lifting height, adopt side cylinder or double test cylinder, smooth operation, no noise, easy maintenance, long service life;
4th. Floor doors can be connected, and the inside and outside of the factory can be punched open, which is convenient and saves space;
5, stationary scissor lift especially suitable for 2-6 floors steel structure workshop, internally and externally can be used;
6. Import pumping station is adopted for the pumping station. If the speed requirement is too high, import customized pumping station shall be adopted to meet the ideal delivery requirements.
7. Imported parts are adopted for oil cylinders and seals to solve the problems of unstable oil pressure and oil leakage of parts.

Stagnant scissor lift manufacturer:

DFLIFT is located in lifting country in China. With more than 10 agencies worldwide, DFLIFT is a professional supplier of stationary scissor lift design, manufacturing and manufacturing. We are committed to:
Bringing reliable lifting solutions to customers
Providing easy and efficient lifting space to users

Why did you choose our stationary scissor lift? How to buy stationary scissor lift

The wide range of stationary scissor lift mainly used in the height difference of the production line between freight transportation; Material online and offline; Adjust the height of the workpiece during assembly. High feed; Lifting of components during assembly of large equipment; Feeding and unloading of large tool; Storage and handling spaces and forklifts and other vehicles that support fast loading and unloading of goods. Stationary scissor lifter can according to the usage requirements, it can be equipped with accessory devices for any combination, such as the safety protection device of a fixed scissor lift platform; Electric control mode; Working platform; Dynamic shape etc.

Contact Us

Click or drag files to this area to upload. You can upload up to 5 files.